L298N Dual H-Bridge Stepper Motor Driver Controller Module Board For Arduino
Description:
Uses ST L298N chip, can directly drive two 3V - 30V DC motor, and provide a 5V output interface, power for 5V single chip circuitry, support 3.3V MCU control. Can easily control the DC motor speed and direction, also control the 2 phase stepper motor.
Specification:
Driver chip: L298N Dual H Bridge DC Motor Driver IC
Driven part of the terminal supply voltage: VMS 5V ~ 35V
Driven part of the peak current IO: 2A per bridge
The logical part of the terminal supply voltage: VSS 4.5V ~ 5.5V
The logical part of the operating current range: 0mA ~ 36mA
Control signal input voltage range: 4.5V ~ 5.5V (high) / 0V (low)
Max power consumption: 20W
Operating temperature: -25°C ~ +130°C
Size: 55 x 60 x 30mm
L298N Dual H-Bridge Stepper Motor Driver Controller Module Board For Arduino
Description:
Uses ST L298N chip, can directly drive two 3V - 30V DC motor, and provide a 5V output interface, power for 5V single chip circuitry, support 3.3V MCU control. Can easily control the DC motor speed and direction, also control the 2 phase stepper motor.
Specification:
Driver chip: L298N Dual H Bridge DC Motor Driver IC
Driven part of the terminal supply voltage: VMS 5V ~ 35V
Driven part of the peak current IO: 2A per bridge
The logical part of the terminal supply voltage: VSS 4.5V ~ 5.5V
The logical part of the operating current range: 0mA ~ 36mA
Control signal input voltage range: 4.5V ~ 5.5V (high) / 0V (low)
Max power consumption: 20W
Operating temperature: -25°C ~ +130°C
Size: 55 x 60 x 30mm
لماذا تتسوق معنا
تسوق بثقة
شحن سريع
إرجاع مجاني
دفع آمن
ضمان 30 يوماً
الدعم
الأسئلة الشائعة
المراجعات
مراجعات العملاء
كن أول من يشارك تجربته
ماذا يقول العملاء
لا توجد مراجعات بعد. اشتريت هذا المنتج؟ شارك رأيك أدناه.
