Description :
Universal Atmega2560 microcontroller module for use in prototypes and projects with microcontrollers. Compatible with the Arduino® Mega 2560 R3 design.
It is a clone that was built according to the original scheme.
The programming is done using the USB UART CH340 converter.
You will need a USB A / B cable to communicate with the board .
Parameters:
Supply voltage: 5V (USB), 7-12V (power adapter)
I / O pin voltage: 5V
Arduino® Mega 2560 R3 bootloader installed
USB-UART chip: CH340
Microcontroller: ATmega2560
Maximum clock frequency: 16 MHz
SRAM memory: 8 kB
Flash memory: 256 KB (8 KB is reserved for bootloader)
EEPROM memory: 4 kB
I / O Ports: 54
PWM outputs: 15
Number of analog inputs: 16 (channels of A / C converter)
Serial interfaces: UART, SPI, I2C
External interrupts
Dimensions: 101 x 54 x 15 mm
Goldpins soldered into the board
Useful links:
CH340 drivers
Arduino® IDE software
Module pinout
Documentation of the Atmega2560
Description :
Universal Atmega2560 microcontroller module for use in prototypes and projects with microcontrollers. Compatible with the Arduino® Mega 2560 R3 design.
It is a clone that was built according to the original scheme.
The programming is done using the USB UART CH340 converter.
You will need a USB A / B cable to communicate with the board .
Parameters:
Supply voltage: 5V (USB), 7-12V (power adapter)
I / O pin voltage: 5V
Arduino® Mega 2560 R3 bootloader installed
USB-UART chip: CH340
Microcontroller: ATmega2560
Maximum clock frequency: 16 MHz
SRAM memory: 8 kB
Flash memory: 256 KB (8 KB is reserved for bootloader)
EEPROM memory: 4 kB
I / O Ports: 54
PWM outputs: 15
Number of analog inputs: 16 (channels of A / C converter)
Serial interfaces: UART, SPI, I2C
External interrupts
Dimensions: 101 x 54 x 15 mm
Goldpins soldered into the board
Useful links:
CH340 drivers
Arduino® IDE software
Module pinout
Documentation of the Atmega2560
