Description:
Output TTL level can be detected with the microcontroller. The power supply can be 3-5V
Can also access PLC24V level
Then the PLC input terminal of the PLC COM power supply 24V input termination of the board signal output OUT, optocoupler board GND power negative
Blue 2P 5.0 terminal connected to 220V voltage
3P terminal connected to the microcontroller input
Specification:
Board Size:73*15mm
Functuon:Testing whether AC 220V is existed
Ouput TTL Level:can use SCM to test,voltage is 3-5V
Adaptive to PLC 24V level
Notice:
When the power module in the power of the board after the white wire frame can not touch any device .. because it is high voltage. Note the safety of electricity.
Description:
Output TTL level can be detected with the microcontroller. The power supply can be 3-5V
Can also access PLC24V level
Then the PLC input terminal of the PLC COM power supply 24V input termination of the board signal output OUT, optocoupler board GND power negative
Blue 2P 5.0 terminal connected to 220V voltage
3P terminal connected to the microcontroller input
Specification:
Board Size:73*15mm
Functuon:Testing whether AC 220V is existed
Ouput TTL Level:can use SCM to test,voltage is 3-5V
Adaptive to PLC 24V level
Notice:
When the power module in the power of the board after the white wire frame can not touch any device .. because it is high voltage. Note the safety of electricity.
لماذا تتسوق معنا
تسوق بثقة
شحن سريع
إرجاع مجاني
دفع آمن
ضمان 30 يوماً
الدعم
الأسئلة الشائعة
المراجعات
مراجعات العملاء
كن أول من يشارك تجربته
ماذا يقول العملاء
لا توجد مراجعات بعد. اشتريت هذا المنتج؟ شارك رأيك أدناه.
